Mechanical Part

1999 5.9L Dodge Cummins cylinder head with valves

. Has some stress cracks that most do. Has not been overheated. Does not leak coolant. From a good running engine. Call 701-845-5196 NO I DO NOT DELIVER

Valley City, ND

$200 OBO

2025-04-03 08:57:29

6 Photos

Kubota diesel engine V1505-E. selling for parts.

bad pistons.

Faulkton, SD

$564

2025-04-03 06:39:57

JE Pistons part number 258222 for a BBC with 4.625 Bore. 1.120 Compression Height.

Was originally purchased for a 4.625 Bore, 4.750 Stroke, & 6.700 Rod but as you can see from the box will fit other

Nortonville, ND

$1,000

2025-04-02 23:23:36

171cc Gy6 big bore with 50 miles left on break in oil has wiring harness and carb

also have frame no title with lowered seat and under the seat tail light. Never used lowered rear shock, coil , fuel

Dickinson, ND

$1,500 OBO

2025-04-02 20:16:06

ISO 241-DLD transfer case.

Looking for a 241-DLD 272 t-case for a 98 dodge 2500 manual shift. Need to be in working order.

Jamestown, ND

Free / Giveaway

2025-04-02 19:11:30

LB7 TCM

Perfectly good factory TCM, was tracing a problem and found out it was a harness issue and not a tcm issue. Put back in pickup verified it works and shifts as it should. Already programmed

Bottineau, ND

$400

2025-04-02 15:58:09

Vortec Engine was going to use for a project truck got rid of the truck and have n

o use for it now got it in California came out of a truck

Williston, ND

Make an Offer

2025-04-02 09:35:06

INTAKE MANIFOLD PLASTIC 2012 FORD EXPEDITION 5.4

New $500 - needs to be cleaned up with new seals installed - was replaced with a new one that did not to be replaced because leak was a hose leak

Grand Forks, ND

$150

2025-04-02 09:15:06

i have lots of car and pickup parts

Sykeston, ND

2025-04-02 08:25:14

3800 Triple Airbag Air Spring 14" Extended 8.5" Diameter, 5" closed 1/2" port 3"

3800 Triple Airbag Air Spring 14" Extended 8.5" Diameter, 5" closed 1/2" port 3½" bolt pattern used for 1 month had to go with doubles for my application. 4 available

Bismarck, ND

$100 Each

2025-04-02 06:42:39

2013 Ford 6.7 diesel exhaust fluid tank

Item is sold as pictured. The tank does not leak. It is actually still full of fluid. It was removed from a deleted 2013 f250. I do not know which parts

Mohall, ND

$200

2025-04-02 06:21:28

(Used) Edelbrock Chrome Valve Covers.

These are for a small block Chevrolet. Come as shown. With chrome hold down t-handles with studs, spreader bars, and dip stick tube.

Bismarck, ND

$75

2025-04-02 06:21:16

(Used) Throttle Body OEM Carburetor.

This Carburetor came off of a 1985 305 cu. in. small block Chevrolet. It was taken off and put in a box and has been on the shelf for 30 years.

Bismarck, ND

$50

2025-04-02 06:21:06

(Used) Cast Iron Intake Manifold for a Big Block Chevrolet.

(Used) This manifold came off of a 1972 402 cu. in. big block Chevrolet. It has been cleaned up sand blasted and repainted and is ready for installation. It has rectangle ports.

Bismarck, ND

$100

2025-04-02 06:20:56

(Used) Stock Heads for a 350 cu. in. Chevrolet.

(Used) Stock heads that came off of a 350 cu. in 1976 Chevrolet engine. They come complete as shown. Casting number is 333882 on both heads.

Bismarck, ND

$100

2025-04-01 19:08:48

1999 blazer rear end. 3:45 gears, dissembled, painted, ready to be put back

together. $400

Mandan, ND

$400

2025-04-01 16:35:48

6 Photos

Ford 300 4.9L In-Line Six Motor Heavy Duty (HD)

Good condition, stored inside. Sold as is (used). May need complete tune-up. These motors are dependable, and can be used in industrial applications

Bismarck, ND

$900 OBO

2025-04-01 15:32:32

4 Photos

Kelderman rear 4 link suspension for dodge ram 3500 8 inch lift used . Everything

works just take off cause I pull a trailer and is to much for my work

Bismarck, ND

$2,000 OBO

2025-04-01 13:36:33

Cold Air Intake- 8th Gen Honda Civic. May fit others?

Cold Air Intake- 8th Gen Honda Civic. *Folks- please do a bit of research and look at the pictures before you commit to purchase- yes, it's a cold air intake and not just a simple installation.* Price

Hazen, ND

$125

2025-04-01 13:18:23

Motor and parts from 1978 C10 Chevy truck. Make me an offer. Not sure on

condition of motor. Was in it when I got the truck. Currently not running.

Bismarck, ND

$1 OBO

2025-04-01 07:12:01

5.0 ford coyote engine came out of a 2 wheel drive 2016 f150 selling engine,

transmission wiring and computer all together has 60,000 miles on it asking 7000 call anytime 527-9227

Bismarck, ND

$7,000

2025-04-01 06:53:33

Chevy Quadrajet oval port intake manifold

used on 396 and 427 Big Blocks Casting# 3883948, date code A67 makes this a 1967 intake. Used on Camaro, Chevelle, Impala. This intake has been

Mandan, ND

$275

2025-04-01 06:48:41

2009 Laramie dodge 1500

parts pickup Motor, Trans, and transfer case all worked strong before it was partially rolled. Not sure on miles has sat a couple years now would have to put a battery back

Marion, ND

$2,000

2025-04-01 04:56:54

ARP main studs for chevy small block

Two bolt main, small journal, brand new https://www.summitracing.com/parts/arp-134-5402

Mandan, ND

$50

2025-03-31 23:04:21

Small Block Chevy

Serious Inquiries Only Please. Considering selling this strong piece. This is a 360 cubic inch small block chevy, bored .060 over, 6 inch rods. 13 to 1 compression. High octane

Valley City, ND

$8,500 OBO

2025-03-31 22:04:09